Other Maintenance Functions; Reset The Set Value; Checking The Uv Lamp Usage - MIMAKI UJF-7151 plus Operation Manual

Register the Nozzle number that needs
6
NOZZLE RECOVERY and press
key.
(1) Select the registration number from 1 to 10
by pressing [][] key and press the
[ENTER] key.
(2) Register the nozzle number that needs
recovery by pressing [][] key and press
the [ENTER] key.
NOZZLE RECOVERY
H1-A
<<
Registration number : 1 to 10
Recovery nozzle No.: 1 to 318, OFF
Example of nozzle to be recovered
184
Nozzle missing
168
No.167
152
136
120
104
88
72
56
40
Nozzle number
24
8
Nozzle missing No.12
Registration Recovery
number Nozzle No.
1 12 Target for nozzle recovery
2 91 Target for nozzle recovery
3 167 Target for nozzle recovery
4 OFF No registration
5 OFF No registration
Press the
7
to end the setting.
• Up to 10 nozzles can be registered per 1 nozzle
line.
• Even if you use this function, time required for
drawing does not change.
• When printing has been done with the lowest path,
nozzle recovery is not reflected.
Perform test printing to confirm.
• If the special ink is not clearly visible, print on the
clear film to check.
NG 1: OFF
>>
193
177
161
145
129
113
Nozzle missing
97
No.91
81
65
49
33
17
1
State
key several times

Other maintenance functions

Reset the set value

Press the
1
key in LOCAL.
• MAINTENANCE MENU will be displayed.
Press to select "NOZZLE
2
RECOVERY", and press the
Press to select "Reset", and
3
press the
Press and to select theNozzle
4
line that need reset, and press the
key.
• A reset confirmation message will be displayed.
Press the
5
to end the setting.

Checking the UV Lamp Usage

Checking UV Lamp Use Time
Press the
1
key in LOCAL.
• MAINTENANCE MENU will be displayed.
Select "UV Lamp", and press the
2
key.
• The UV irradiation time is displayed.
Press the
3
end the setting.
Chapter 4 Maintenance
(4 times)
(MENU)
key.
key.
key several times
(MENU) (4 times)
key several times to
4-13
1
2
2
4
5
6