To Replenish Ink, Set A New Ink Cartridge In The Ink Station - MIMAKI GP-1810 Operation Manual

To replenish ink, set a new ink cartridge in the ink station

If ink in the cartridge comes to an empty, the corresponding message appears.
Printing can be continued but ink may run out during printing.
Immediately put a new ink cartridge.
< When the amount of ink becomes small during printing >
Indicate the ink color which has run out.
The display at right indicates that [slot1] and [slotA] comes to an end.
< When the amount of ink completely runs out during printing >
Indicate the ink color which has completely run out.
The display at right indicates that [slotC] runs out.
STEPS:
1. Either of the messages shown above is dis-
played on the LCD during printing.
When [INKnearEND] appears, the LOCAL mode is resumed
and the operation stopped each time printing of a single data
is completed. Proceed with Step 2 at the end of the printing
operation. Proceed to Step 2 at the end of the printing
operation.
When [INKEND] appears, printing cannot be continued.
2. Install a new ink cartridge.
Pull out the ink cartridge of the indicated number and then
set a new ink cartridge.
3. The machine enters the LOCAL mode.
Continuous printing is possible.
- 2.19 -
Ink Near End
1 - - - - - - - A - - - - - - -
Ink End
- - - - - - - - - - C - - - - -