Adjusting The Throttle Link; Checking The Gear Shift Operation (Tiller Handle Model) - SELVA MARINE Wahoo 15 Service Manual

CHK
ADJ
7. Set the remote control lever to the fully
open and fully closed positions and
check that the fully open stopper c and
fully closed stopper a on the throttle
cam contact the throttle cam bracket as
shown.
È
c
É
a
È Fully open position
É Fully closed position
8. Connect the throttle link rod to the free
accel lever.
NOTE:
After adjusting the throttle cables, adjust the
throttle link. (Tiller handle model)
After adjusting the throttle cable, adjust the
throttle link. (Remote control model)

Adjusting the throttle link

1. Loosen the throttle link stopper screw 1.
1
a
3-9
Periodic check and adjustment
S6AG3370
3
b
c
4
2
S6AG3350J
2. Turn the throttle grip (tiller handle model)
or remote control lever (remote control
model) to the fully open position and hold
it in place. Check that the fully open stop-
per 2 on the throttle cam contacts the
throttle cam bracket a.
NOTE:
If the fully open stopper 2 does not contact
the throttle cam bracket a, adjust the throttle
cable(s). See "Adjusting the throttle cable
(tiller handle model)" (3-7) or "Adjusting the
throttle cable (remote control model)" (3-8).
3. Turn the carburetor throttle lever 3
clockwise so that it contacts the carbure-
tor body b as shown.
4. Turn the free accel lever 4 clockwise
until it contacts the throttle cam c.
5. Tighten the throttle link stopper screw 1.
6. Turn the throttle grip (tiller handle model)
or remote control lever (remote control
model) to the fully open and fully closed
positions and check that the throttle cam
operates smoothly.
NOTE:
After adjusting the throttle link, adjust the
engine idle speed. See "Checking the engine
idle speed" (3-11).
Checking the gear shift operation
(tiller handle model)
3
1. Check that the gear shift operates
smoothly when the shift lever is shifted
from the neutral position to forward or
reverse. Adjust the shift rod adjusting nut
1 if necessary.
3
6AG3J11