Removing the clamp bracket
1. Remove the tilt pin 1, and then remove
the clamp bracket bolt 2, clamp bracket
nut, and collar.
2. Remove the tilt stopper plate bolts 3
(swivel bracket side).
3. Remove the self-locking nut 4 and
hanger 5.
4. Remove the through tube 6 and tilt lock
lever 7, and then disassemble the clamp
brackets.
NOTE:
Unhook tilt lock rod 1 8 from the tilt lock
lever 7 when removing it.
5. Remove the tilt stopper plate bolts 9
(clamp bracket side) and tilt stopper
plates 0.
0
9
3
8
7
4
5
6
Disassembling the swivel bracket
1. Remove the spring 5. Remove the E-
clips 1 from the tilt lever shaft 2, and
then pull out the shaft and remove the tilt
lever 3 and tilt lock rod 2 4.
6AG3J11
Clamp bracket and swivel bracket (manual tilt model)
7
9
0
3
1
2
S6AG7A40
7
2
1
4
5
NOTE:
Unhook tilt lock rod 2 4 from the tilt lever 3
when removing it.
2. Remove the E-clip 6 from the stopper
shaft 7, and then pull out the shaft and
remove the receiver assembly 8.
2
3
1
7
8
3
1
S6AG7410
1
6
5
4
S6AG7950
7-22
1
2
3
4
5
6
7
8
9