Control Functions - SELVA MARINE Corse Owner's Manual

Table of Contents

Advertisement

CONTROL FUNCTIONS

Security switch / Push-button to stop the motor.
Pressing the stop button (red) the ignition circuit is broken and
the engine stops immediately.
Choke knob.
Pulling this knob supplies a rich mixture required to start a cold
engine.
Fuel joint
Connecting the fast fuel joint, you connect the fuel hose to the
fuel tank.
Recoil starter handle.
Pulling this handle starts the engine.
Throttle-control adjustment.
Device which permit to have a constant speed.
Accelerator-grip/steering-handle.
Turn the grip to operate the accelerator, and move it sideways
to adjust the steering angle.
Cowling lock lever.
Moving this two levers upwards locks the top cowling. To
remove the top cowling push the cowling lock levers
downwards
Picture No. 17.
Picture No. 18.
Picture No. 19.
Picture No. 20.
Picture No. 21.
Picture No. 22.
Picture No. 23
10
Motor tilt cam
You use this to bloc and unblock the engine in the tilt position
Clamp-screws.
Use them to clamp the outboard motor on the transom
Steering adjustment grip.
With it you can adjust the resistance to steering movement.
Screw it to increase resistance.
Trim angle adjusting-rod.
It can be positioned in different holes in order to obtain the
appropriate trim angle.
Picture No. 24.
Picture No. 25.
Picture No. 26.
Picture No. 27.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents