SELVA MARINE Wahoo 15 Service Manual page 163

11. Fasten the leads with the plastic ties S
and holders T, and then install the junc-
tion box cover.
12. Connect the flushing hose U, cooling
water hose V, and fuel hose W.
U V
13. Connect the battery cables. (Electric
starter model)
Connect the battery cables and 10-pin
main harness coupler. (Remote control
model)
Install the retaining plate.
14. Install the manual starter and sprocket
cover, and then connect the start-in-gear
protection cable. (Manual starter model)
Install the flywheel magnet cover and
sprocket cover. (Electric starter model)
6AG3J11
NOTE:
• To connect the start-in-gear protection
• Be sure to install the caps Y on the bolts X
15. Pour the specified amount of the recom-
NOTE:
For the specified amount and recommended
engine oil, see "Changing the engine oil" (3-
W
S6AG5D01
3).
Y
X
S6AG5D02
cable, see "Checking the start-in-gear pro-
tection (manual starter model)" (3-11).
for the flywheel magnet cover and junction
box.
mended engine oil into the oil filler hole.
Cylinder block
1
2
3
4
5
6
7
8
9
5-64