Disassembling The Tiller Handle; Assembling The Tiller Handle - SELVA MARINE Wahoo 15 Service Manual

BRKT

Disassembling the tiller handle

1. Remove the steering bracket cover 1.
1
2. Disconnect the engine stop lanyard
switch leads 2 and power tilt switch
leads 3 (power tilt model) and remove
the leads from their holders.
È
É
3
È Manual tilt model
É Power tilt model
3. Disconnect the throttle cables 4 from the
throttle cam 5.
7-3
Bracket unit
S6AG7A60
2
2
S6AG7A70
2
2
S6AG7A71
7
4. Remove the tiller handle.
NOTE:
See the exploded diagram for disassembly
(7-1).

Assembling the tiller handle

1. Assemble the tiller handle.
NOTE:
See the exploded diagram for assembly (7-
1).
2. Install the throttle friction adjuster 1, and
then install the cotter pin 2.
3. Install the engine stop lanyard switch 3
to the tiller handle bracket 4. Tighten the
nut 5 to the specified torque. Pass the
lead through the grommet.
4. Install the power tilt switch 6 to the
bracket 7, and then tighten the bracket
screws 8 to the specified torque. (Power
tilt model)
5. Install the power tilt switch 6 to the tiller
handle bracket 4. Pass the lead through
the grommet. (Power tilt model)
5
1
2
4
S6AG7A80
7
S6AG7490
6AG3J11