Control Functions - SELVA MARINE SEA HORSE2,5 Owner's Manual

CONTROL FUNCTIONS

Security switch / Push-button to stop the motor.
Pressing the stop button (red) the ignition circuit is interrupted and the
engine stops immediately.
Choke knob.
Pulling this knob supplies a rich mixture required to start a cold engine.
Recoil starter handle.
Pulling this handle starts the engine.
Throttle-control adjustment.
Device which permit to have a constant speed.
Accelerator-grip/steering-handle.
Turn the grip to operate the accelerator, and move it sideways to adjust
the steering angle.
Cowling lock lever.
Moving this two levers upwards locks the top cowling. To remove the top
cowling push the cowling lock levers downwards
Picture No. 13.
Picture No. 14.
Picture No. 15.
Picture No. 16.
Picture No. 17.
Picture No. 18.
Motor tilt cam
You use this to bloc and unblock the engine in the tilt position
Clamp-screws.
Use them to clamp the outboard motor on the transom
Steering adjustment grip.
With it you can adjust the resistance to steering movement. Screw it to
increase resistance.
Trim angle adjusting-rod.
It can be positioned in different holes in order to obtain the appropriate trim
angle.
10
Picture No. 19.
Picture No. 20.
Picture No. 21.
Picture No. 22.