Panasonic MN10285K User Manual page 226

IR Remote Signal Receiver
IR Remote Signal Receiver Control Registers
MN102H75K/F75K/85K/F85K LSI User Manual
RMIS: Remote Signal Interrupt Status Register
Bit: 7 6 5 4
BC BC FMT DOMES
RSTE EDGS MON D
Reset: 0 0 0 0
R/W: R/W R/W R R/W
RMIR indicates the detection and operation status of remote signal inter-
rupts. It is a 16-bit access register.
BCRSTE: 8-bit data reception binary counter reset enable
0: Disable
1: Enable
BCEDGS: 8-bit data reception binary counter reset edge select
0: Reset at 1st edge
1: Reset at 2nd edge
FMTMON: Format monitor
0: HEAMA format
1: 5-/6-bit format
DOMESD: Interrupt request on HEAMA leader detection
0: No request
1: Request
M56BITD: Interrupt request on 5-/6-bit leader detection
0: No request
1: Request
TRAILRD: Interrupt request on trailer detection
0: No request
1: Request
DAT8D: Interrupt request on 8-bit reception detection
0: No request
1: Request
EDGED: Interrupt request on RMIN pin edge detection
0: No request
1: Request
225
Panasonic
3 2 1 0
M56BIT TRAILR DAT8 EDGE
D D D D
0 0 0 0
R/W R/W R/W R/W
Panasonic Semiconductor Development Company
x'007EA0'