Controlling The Shuttering Effect; Controlling The Shuttered Area; Bit Settings For Controlling The Shuttered Area; Panasonic - Panasonic MN10285K User Manual

Panax series microcomputer
Table of Contents

Advertisement

Table 7-12 Bit Settings for Controlling the Shuttered Area
Function
VSHT0 Bit
Shutter enable/disable
VSON0
Shutter position
VST00–
Shuttering direction
Shuttering mode control
Panasonic Semiconductor Development Company

7.13 Controlling the Shuttering Effect

The MN102H75K/85K OSD achieves a shuttering effect using four pro-
grammable shutters—two vertical and two horizontal. With this feature, you can
shutter any portion of the OSD display, or you can combine shuttering with a
wipe-out effect to create a smooth appearing and disappearing effect.
To prevent flickering and shadows on the display, only write to the registers
during the VSYNC cycle.

7.13.1 Controlling the Shuttered Area

The register settings for the two vertical shutters, VSHT0 and VSHT1, and the
two horizontal shutters, HSHT0 and HSHT1, control which area of the screen is
shuttered. Table 7-12 shows the register settings required for this function, and
figure 7-31 shows four setup examples.
VSHT1 Bit HSHT0 Bit HSHT1 Bit
VSON1
HSON0
VST10–
HST00–
VST09
VST19
HST09
VSP0
VSP1
HSP0
SHTRAD
(shared bit)
Determining the vertical shutter positions (VST0 and VST1)
The top edge of the television screen is x'000'. Each integer higher brings the
shutter position down one H scan line.
Determining the horizontal shutter positions (HST0 and HST1)
The left edge of the television screen is x'000'. Each integer higher brings the
shutter position right one pixel. (One pixel, or one dot, is the smallest display unit
in the OSD.)
HSON1
0:Disable shutter (Acts as though there are no
shutter lines.)
1:Enable shutter
HST10–
For vertical shutters, this is the number of H scan
HST19
lines from the top of the screen. For horizontal
shutters, it is the number of pixels from the left of
the screen.
HSP1
0:Shutter below (vertical shutters) or to the right
(horizontal shutters)
1:Shutter above (vertical shutters) or to the left
(horizontal shutters)
0:AND the shuttered areas of all the shutters
1:OR the shuttered areas of all the shutters
MN102H75K/F75K/85K/F85K LSI User Manual
194

Panasonic

On-Screen Display
Controlling the Shuttering Effect
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mn102f75kMn102f85kMn102h75kMn102h85k

Table of Contents