Table of Contents
Advertisement
Panasonic Semiconductor Development Company
Considerations for power supply, clock, and reset pins
Note: If the circuit uses the same power supply for digital and analog supplies, connect
the pins in the location closest to the power supply.
OSC1
4 MHz
Note: The capacitance values vary depending on the oscillator.
Figure 1-12 OSC1 and OSC2 Connection Examples
Figure 1-13 Reset Pin Connection Example 1
Note: The capacitance values vary depending on the oscillator.
Figure 1-14 OSDXI and OSDXO Connection Examples
Connection the PLL circuit
The MN102H75K/85K contains an internal PLL circuit. To use this circuit, you
must connect it to an external (lag-lead) filter.
Panasonic
Figure 1-11 Power Supply Wiring
OSC2
0.1 F
4 MHz
10 k - 50 k
RST
+
-
10 µF - 100 µF
MN102H75K/F75K/85K/F85K LSI User Manual
34
General Description
Pin Descriptions
OSC1
OSC2
Oscillation
Circuit
Di
SW
Advertisement
Table of Contents
