Panasonic MN10285K User Manual page 168

On-Screen Display
VRAM
In closed-caption mode, only the
b'00', b'01', and b'11' settings
are available for CVSZ[1:0]. The
b'10' setting is reserved.
MN102H75K/F75K/85K/F85K LSI User Manual
CHP: Character Horizontal Position Control Code
CHSZ[1:0]
Specifies the H size of the characters on the next line.
00: 1 dot = 1 VCLK period
01: 1 dot = 2 VCLK periods
10: 1 dot = 3 VCLK periods
11: 1 dot = 4 VCLK periods
CSHT
Specifies shutter operation for the next line. Setting this bit to 1 disables
the shuttering function. You can disable and enable shuttering on a line-by-
line basis.
0: Enable
1: Disable
CHP[9:0]
Specifies a VCLK indicating the horizontal start position for the next line.
1024 steps are available.
CVP: Character Vertical Position Control Code
CLAST
Specifies the last line in the internal RAM text layer. This resets the line
pointer for character reads from the internal RAM to the first line.
0: Disable
1: Enable
CVSZ[1:0]
Specifies the V size of the characters on the next line.
00: 1 dot = 1 H scan line
01: 1 dot = 2 H scan lines
10: 1 dot = 4 H scan lines
11: 1 dot = 6 H scan lines
CINT
Specifies an OSD interrupt.
0: Disable
1: Enable
CVP[9:0]
Specifies an H scan line indicating the vertical start position for the next
line. 1024 steps are available.
Graphics Layer
GTC: Graphic Tile Code
GCBF
Repeat blank/repeat tile select.
0: Repeat blank
1: Repeat tile
167
Panasonic
Panasonic Semiconductor Development Company
ID Code: 11
ID Code: 11
ID Code: 00