Memory Operation - Icom IC-3SAT Instruction Manual

21
б MEMORY OPERATION
6-3 Transferring a memory
Copy and transfer the displayed memory contents into the
VFO. This function is useful for searching for signals
around the memory frequency and for recalling the offset
frequency which is independently programmed in memory
` channels O ~ 9.
Push and hold
(E + сэ
MEMORY MODE VFO MODE
1) Push [B] (MR) to select MEMORY mode.
2) Select the memory channel to be transferred: |
- Rotate the tuning control or push. [B] several times
then push a digit key.
3) While pushing [Е], push and hold [A] (CLR/MP V) until
the transceiver emits 3 beeps.
e The memory contents are transferred into the VFO.
e The transceiver returns to VFO mode.
6-4 Masking a memory
Unwanted memory channels can be masked (made blank).
A masked memory channel cannot be selected for normal |
use. The contents of the masked memory can be recalled.
1) Push [B] (MR) to select MEMORY mode.
2) Select the memory channel in MEMORY mode to be
4) To recall the masked memory channel, repeat step 2.
5) Push [A] (CLR) to return to VFO mode.