Port Group - Fujitsu PRIMERGY BX600 User Interface Description

Device Configuration Commands
Port Backup: The status of port backup for the uplink set.
IGMP snooping: The status of the IGMP snooping for the uplink set.
LACP: The status of the LACP for the uplink set.
7.4.5.2 Configuration Commands
7.4.5.2.1 uplink-set
This command is used to create or delete an uplink set.
Syntax
uplink-set <uplinkSetName>
no uplink-set <uplinkSetName>
<uplinkSetName> - A string associated with uplink set as a convenience. It can be up to
32 alphanumeric characters, and can not be blank.
no - This command deletes an existing uplink set.
Default Setting
None
Command Mode
Global Config
This command is used to add or remove a port to/form a uplink set.
Syntax
uplink-set <uplinkSetName>
no uplink-set <uplinkSetName>
<uplinkSetName> - A string associated with uplink set as a convenience. It can be up to
32 alphanumeric characters, and can not be blank.
no - This command remove a port from a uplink set.
Default Setting
None
Command Mode
Interface Config

7.4.6 Port Group

160
Command Reference
Intelligent Blade Panel Module