Basic Operating Processes; General - Leibinger JET3 User Manual

Group 6
The characters are entered with the keyboard fields. The structure of the keyboard
fields corresponds to the common computer keyboards.
Note: Depending on the installed language package (e.g. Cyrillic) the structure can
vary from the shown display.
With the button <Return ↵> (1) the input is taken over and the number block will
be closed.
With the button <Special characters> (2) you can change between the standard
characters and the special characters.

6.4 Basic operating processes

This paragraph describes the basic operating processes of the LEIBINGER JET3.

6.4.1 General

The complete control of the JET3 can be carried out with a connected PC-mouse or
directly with the TFT-Touch-Display.
For the operation with the Touch-Display the control of the device happens by a
slight touch on the buttons (touch-fields) with the finger or with the touch pin
(included in the delivery). Here the targeted precision is decisive and not the
pressure.
The operation with the Touch-Display is described subsequently.
Release R1.03e
Operation – Elements and procedures
Accidentally touching can release unintentional device conditions.
Page 54
LEIBINGER JET3