Structure - Leibinger JET3 User Manual

Group 7

7.5.7.2 Structure

Figure 79
1
2
3
1 – Button <Edit>
2 – Direct buttons <Tools>
3 – Selection window <Harddisc>
4 – Selection window <Ext. memory>
Button <Edit> (1) and direct buttons [icons] (2): With the button or with the
icons you can select the tools of the explorer.
Selection window <Harddisc> (3): In the selection window the data or the
filtered data of the internal memory of the JET3 are displayed.
Selection window <External memory> (4): In the selection window the data or
the filtered data of the external data carrier which have been selected in the Pop-
up window <memory device > are displayed.
Annotation: A selection window is activated by clicking on the display area of
the window. The active window is marked by a turquoise border.
Release R1.03e
Data/Programming
active
selection window
JExplorer (Structure)
5 – Pop-up window <Filter>
6 – Pop-up window <memory device>
7 – Button <Close>
Page 140
5
6
4
7
LEIBINGER JET3