Return Stop - Leibinger JET3 User Manual

Group 8

8.5.2.5 Return stop

With the control box <lock backward> the function „lock backward movement of
the encoder" is activated or deactivated.
For activated "lock backward" the strokes which are generated for a possible
backward motion will be included for following forward motion to control the
correct start of the text output.
That means the print will be only continued if the correct printing position has been
reached. Therefore you will get a print without any gaps or overlaps.
8.5.3 Font parameter values
The menu <Printstyle> allows the design of the text layout.
The following settings can be carried out:
Selection of print height
Selection of font width (Stroke distance)
8.5.3.1 Print height
The setting determines the print height. The print height is determined by the
vertical drop distance. The value can set between 1 – 100%.
The set value is shown on the accordant display field.
As higher the entered value, as larger the distance between the single dots.
Figure 112
Release R1.03e
Job editor
(Stop backwards)
(Print style)
Page 179
Selection of orientation
Selection of print mode
Print height
LEIBINGER JET3