Measures In The Event Of Accidental Release (Spillage) - Leibinger JET3 User Manual

Group 3

3.4 Measures in the event of accidental release (spillage)

PRECAUTIONARY
MEASURES
ENVIRONMENTAL
PROTECTION
MEASURES
RESTORATION
Release R1.03e
Accident prevention
Switch off sources of ignition and ventilate room. Keep
personnel that is not absolutely necessary away. Do not inhale
any vapour. Observe the protective measures listed.
DO NOT allow to enter waste water channels or waters.
Should the product enter waste water channels or the drainage
system the local water supply authority must be informed
immediately. In the event of contamination of streams, rivers or
lakes inform the national water authorities. Vapour is heavier
than air and can spread out on the ground. In combination with
air it can form an explosive mixture.
Restrict and suck up spilled substances with a non-combustible
absorbent material (e.g. sand, earth, vermiculite, infusorial
earth) and collect in a suitable container for removal. Preferably
clean areas with spilled substances with a detergent. Avoid
solvents.
Page 22
LEIBINGER JET3