Operating Staff; Dangers Due To Electric Energy; Personal Protective Equipment; Protective Devices And Safety Concept - Leibinger JET2 neo Manual

Page 20

2.5 Operating staff

Only trained personnel must operate the device. The personnel must have appropriate
training to enable them to be able to operate the JET2 neo high performance printer
professionally.
Within the working area of the LEIBINGER JET2 neo device the operator is responsible
with regard to third parties.
The operator must
put this operating manual at the operating staff's disposal and
make sure that they have read and understood them.

2.6 Dangers due to electric energy

The electrical and electronic components of the high performance printer
are under voltage. The device must only be opened by trained personnel
or by Leibinger service technicians.
Prior to the opening of the device the device must be switched off and
the mains plug removed.

2.7 Personal protective equipment

Materials are processed in this device that cause irritations and which are under
pressure. In order to avoid injury and damage the personnel must wear the following
personal protective equipment during certain work procedures:
suitable work clothing
suitable eye protection
suitable hand protection
More detailed information can be found in the corresponding chapters of this manual as
well as possibly in information and data leaflets of consumables.

2.8 Protective devices and safety concept

In an emergency the device is placed idle by removal of the mains plug.
The device is equipped with the following safety concept to provide explosion
protection:
Bottom tub as collecting tray
Release R1.07 en
Safety
Jet monitoring in the gutter circuit
Group 2
JET2 neo