Save Counter States - Leibinger JET3 User Manual

Group 7
7.5 Extra (Additional functions)
With the button <Extra> in the main menu bar the submenu „Extra" is displayed. The
following options are available:
Test Print
Login
Explorer
Database Settings

7.5.1 Save counter states

For leaving a job, the counter status of integrated job counters are normally not
saved, that means for calling this job again, the counter states are 0 respectively set
to the predefined start values.
If the print should be continued with already existing counter states for calling the
job again, you have to activate the function <Save Counters>. If this function is
activated it is displayed by a √ on the button of the function.
The function is activated or deactivated as following:
Press the button <Extra> (1) and the option <Save Counters> (2).
The function is activated or deactivated depending on the existing state.
Figure 58
1 – Button <Extra>
Release R1.03e
Data/Programming
Direct Printstart
Interface Settings
Reload all Fonts
Save Counters
1
2
2 – Option <Save Counters>
Product Counter
Editors
Touch Calibration
Function activated
Save counter states
LEIBINGER JET3
Page 110