Operating Staff; Dangers Due To Electric Energy; Personal Protective Equipment; Protective Devices And Safety Concept - Leibinger JET3 UP Service Manual

2.5 Operating staff

Only trained personnel must operate the device. The personnel must have appropriate
training to enable them to be able to operate the JET3up high performance printer
professionally.
Within the working area of the up device the operator is responsible with regard to third
parties.
The operator must
 put this operating manual at the operating staff's disposal and
 make sure that they have read and understood them.

2.6 Dangers due to electric energy

The electrical and electronic components of the high performance printer
are under voltage. The device must only be opened by trained personnel
or by Leibinger service technicians.
Prior to the opening of the device the device must be switched off and the
mains plug removed.

2.7 Personal protective equipment

Materials are processed in this device that cause irritations and which are under pressure. In
order to avoid injury and damage the personnel must wear the following personal protective
equipment during certain work procedures:
 suitable work clothing
 suitable eye protection
 suitable hand protection
More detailed information can be found in the corresponding chapters of this manual as well
as possibly in information and data leaflets of consumables.

2.8 Protective devices and safety concept

In an emergency the device is placed idle by removal of the mains plug.
The device is equipped with the following safety concept to provide explosion protection:
 Bottom tub as collecting tray
Rev. 1.0
Service Manual JET3
 Jet monitoring in the gutter circuit
13