Date/Time And Expiry Time - Leibinger JET3 User Manual

Group 8

8.7.2 Date/time and expiry time

Provides the bonding of date- and time specifications and definition of the expiry
time of the font parameters and of the display options.
Further more accordant substitutions (numbers, letters or designations) for the date-
and time values can be generated to get an operating-specific display or coding of
the specifications.
Note: "Expiry time" is the time which elapses until the product cannot be used any-
more.
8.7.2.1 Insert date- and time specifications
Example: Additionally to an existing fix text „A" the current date should be printed
and to the existing fixt text „V" the resulting expiry date.
The date specification should be in the format „Day/Month/Year".
The expiry time is 15 days.
Proceeding (Step 1):
Press the button <Insert> (1) and the option <Date/Time> (2) or the
accordant direct buttons.
The menu <Object Settings (Date/Time)> (4) is faded in.
Carry out the requested settings for the font parameters and display options in
the functional area <Global Settings> (5). You will find further information in
the Chapter Object settings.
Note: In the setting fields <Position X/Y> (6 )the system shows automatically
the next possible position of the object after an existing fix text. This
position can or has to be changed depending on the input situation!
Now change to the functional area <Date/Time> (7). The selection of the
functional area happens by clicking on the accordant register card (15).
Press the following buttons (8-11) in the appropriate sequence to generate the
current date input:
„Day" „/"
The formatting of the inputs is shown on the display field <Content> (12).
Press the button <OK> (13) to take over the inputs and to close the menu or
press the button <Cancel> (14) to leave the menu without saving the inputs.
Release R1.03e
„Month" „/" „Year"
Job editor Page 191
LEIBINGER JET3