Load Job To Print - Leibinger JET3 User Manual

Group 8

8.3.2 Load job to print

With the option <Load Job to print> the job which is currently opened in the job
editor can be loaded directly for printing.
Figure 93
1
7
Job editor (Load job to print)
1 – Button <Job>
2 – Option <Load Job to print >
3 – Message <Print job change>
4 – Button <OK>
5 – Button <Cancel>
Proceeding:
Press the button <Job> (1) and the option <Load job to print> (2).
A safety query (3), if the print job should be really changed is faded in.
Confirm the change by pressing on the button <OK> (4) or cancel the process
with the button <Cancel> (5).
The job in the job editor is now loaded for printing. Attention! If a print start
release has already happened for the original job, the JET3 starts immediately
with the printing process.
Release R1.03e
Job editor
2
10 – Button <Cancel>
4
6
10
6 – Button <Close>
7 – Option <Close Editor>
8 – Message <Reload original job>
9 – Button <OK>
Page 160
3
5
8
9
LEIBINGER JET3