Mix Only Ink/Sovent - Leibinger JET3 User Manual

Group 7

7.4.4.2 Mix only ink/sovent

With the two buttons <Mix only Ink > (1) and <Mix only Solvent > (2) only ink or
solvent can be supplied to the hydraulic circuit.
These functions allow to set the viscosity of the ink fast to a lower or higher value.
The execution of addition of the selected medium is displayed by an accordant
message (3).
With the button <Stop> (4) the particular process will be finished.
Figure 54
1 – Button <Mix only Ink>
2 – Button <Mix only Solvent>
Release R1.03e
Data/Programming
Attention!
By the addition of solvent or ink the ink can be diluted or
concetrated too much! Therefore this function should be only
carried out by qualified personnel.
4
2 – Message <Delivery .....>
4 – Button <Stop>
Page 104
1
2
3
Ink-/Solvent delivery
LEIBINGER JET3