Carry Out Editor Settings - Leibinger JET3 User Manual

Group 7

7.5.5.7 Carry out editor settings

With the display tools you can change the settings of the editor. The following
functions are available:
Enlarge and reduce display size (Zoom in/out)
Show grid
Settings
With the option <Settings> you can set the editor size (width and height of the
drawing area) as well as the grid size.
Proceeding:
Press the button <View> (1) and the option <Settings> (2).
The window <Editor Settings> (3) is faded in.
With the Arrow buttons (4) you can increase or reduce the values of the editor
size and the grid size by one step.
alternatively
Click in the appropriate display field (5) of the value which you would like to
change. A number block opens for input Now enter the requested value.
The button <OK> (6) closes the window.
Note: Irrespectively of the set grid size points are always created in the grid size
1x1 and line- and circle elements in the grid size 1..
You will find further information regarding the further display tools in
the chapter Display tools!
Release R1.03e
Data/Programming
You will find further information regarding the working with
number blocks in the chapter Number block!
Page 132
LEIBINGER JET3