Service/Maintenance; Daily Servicing Work - Leibinger JET3 User Manual

Group 10
Put the re-filling bottle on the solvent tank. The seal of the bottle will be
breached and the closing valve of the tank will open automatically and the
reservoir tank is filled up.
Wait until the re-filling bottle is completely emtpy.
Take out the empty re-filling bottle. The closing valve of the reservoir tank will
be closed automatically.
Finally twist the screw cap of the tank again carefully.

10.2 Service/Maintenance

Risk of fire!
Combustible gases and liquids cause serious burns. Sources of ignition
must be kept away from the print head!
Dangerous material in the machine!
Read the safety leaflets and the regulations on personal safety
equipment!
Risk of injury!
Ink escapes from the head aperture. Spraying of ink into the eyes can
cause blindness. Eye protection is necessary!

10.2.1 Daily servicing work

The daily servicing work includes the checking of the print head and in particular of
the deflector unit, the charging electrode as well as of the guides for dirt. If
necessary the components must be cleaned as described in the chapter Cleaning.
Release R1.03e
Equipping/Maintenance
Attention! Do not open the seal of the re-filling bottle!
Page 211
LEIBINGER JET3