Leibinger JET3 User Manual page 91

Group 7
The menu allows to carry out a temporary test of the inputs and outputs of the
LEIBINGER JET3 during the troubleshooting without any additional tools.
If signals are fed to the inputs the signal status are displayed in the menu. The
functions which are assigned to the inputs are not carried out for feeding the
signals!
Active in-/outputs are displayed by a green status display.
For leaving the menu all carried out settings will be rejected, that means if outputs
have been defined just for testing (activated) they will be deactivated again.
Release R1.03e
Data/Programming Page 91
LEIBINGER JET3