Taking Out Of Operation/Dismantling; Taking Out Of Operation; Dismantling/Disposal - Leibinger JET3 User Manual

Group 11

11. Taking out of operation/Dismantling

11.1 Taking out of operation

The ink and solvent which still remains in the high performance printer have to be
removed. For this a special draining routine is available.
You will find further information regarding the procedure of draining in
the chapter Draining routine!
Dangerous material in the machine!
Read the safety leaflets and the regulations on personal safety
equipment!
Now the high performance printer has to be turned off and disconnected from the mains
supply. Further more you have to disconnect possible connected additional devices. You
will find the capabilities of connecting on the back side of the device. You have to
follow the instructions of the serveral devices!
Finally you have to cleanse the device of dirt, ink rests etc. as described in the chapter
Cleaning.

11.2 Dismantling/Disposal

The LEIBINGER JET3 has been developed and built with materials that ensure problem-
free dismantling and disposal. When dismantling, the information in the chapter Taking
out of operation as well as the respective country specific disposal regulations (e.g. for
inks and solvents) must be taken into consideration
Release R1.03e
Taking out of operation/Dismantling Page 214
LEIBINGER JET3