Integration Of Counters - Leibinger JET3 User Manual

Group 8
EAN 13:
numeric code (only numbers from 0-9 can be displayed)
has to be always 13-digits (12 performance characters and 1 check digit)
(is available with or without clear figure for the LEIBINGER JET3)
UPC A: (American equivalent to EAN13)
numeric code (only numbers from 0-9 can be displayed)
has to be always 12-digits (11 performance characters and 1 check digit)
(is available with or without clear figure for the LEIBINGER JET3)
UPC E: (American equivalent to EAN8)
numeric code (only numbers from 0-9 can be displayed)
has to be always 8-digits
(6 performance character, 1 check digit and 1 system character)
(is available with or without clear figure for the LEIBINGER JET3)
Datamatrix-Code (2D-Code):
up to 50 numerical numbers can be displayed or up to 36 letters can be
displayed (the combination of numbers and letters is alllowed).
The form has to be always set that it corresponds with a square.

8.7.1.2 Integration of counters

Due to integrated counters and replacements impermissible number
of digits or invalid constellations can be caused. These barcodes are
displayed as crossed out codes in the software.
Error example:
Release R1.03e
Job editor
Display of a correct
barcode
Page 189
Display of an invalid
barcode
LEIBINGER JET3