Password Protection (Password Query) - Leibinger JET3 User Manual

Group 7

7.3.3 Password protection (Password query)

If the password protection LEIBINGER JET3 is activated a password enquiry is
carried out for every start of the device.
Further more the function <Login> in the menu „Extras" is activated. With this
function an user can login during the operation to e.g. carry out functions which are
still not enabled and can logout and can therefore prevent changes of the settings
by unauthorized staff.
Note: If no password has been entered for an activated password query during
starting the device, only the following basic functions are available for
the user.
After logout of the user these basic functions are still only available.
If the function is activated it is displayed by a √ on the control box of the function.
The function is activated or deactivated as following:
Press the button <Settings> (1) and the option <Password Activate> (2).
The function is activated or deactivated depending on the existing status.
Figure 44
1 – Button <Settings>
You will find further information regarding login/logout and switching
on the device in the chapters Login and Switching on with password
protection!
Release R1.03e
Data/Programming
Open and close nozzle
Print start and print stop
Login
Touch-Calibration
1
2
2 – Option <Password protection activated >
Function activated
Activate/deactivate password query
Page 88
LEIBINGER JET3