Special Functions And Tools - Leibinger JET3 User Manual

Group 7

7.4.4 Special functions and tools

Under the register card <Special Functions/Tools> the following functions are
available:
Pressureless
Constant Bleed
Drain Routine
Fill up Routine
7.4.4.1 Constant bleed
By pressing the button <Constant Bleed> (1) the constant bleeding is started.
During the process the message „Constant Bleed" (2) is displayed. The bleeding can
be canceled any time by pressing on the button <Stop> (3). During this process
the visco pump is activated for 3 sec. every minute to ensure a purging of the
pump.
With the button <Add Solv> (4) you can add only solvent. This function provides
specially filling operations to bleed e.g. the solvent tube or to set the viscosity of
the ink faster to a lower value.
Release R1.03e
Data/Programming
The function constant bleeding is only activated or functional under
the following device conditions:
Ink suction is turned on
Nozzle is closed
Head cover has been detached
Attention!
By adding the solvent the ink can be diluted too strong. Therefore
this function should only be carried out by qualified personnel.
Mix only Ink
Mix only Solvent
Ignore error messages and warnings
Page 102
LEIBINGER JET3