Data Entry/Programming; General - Leibinger JET3 User Manual

Group 7 Data/Programming Page 66

7. Data entry/Programming

7.1 General

Data which should be printed by the LEIBINGER JET3 can be entered, called, changed
and saved with several input devices, e.g. TFT-Touch display, mouse etc..
The printer can also be programed and controlled with the (RS232/Ethernet) per external
software (according to the Leibinger interface protocol for the LJ3).
Further more the LEIBINGER JET3 can also carry out several functions (e.g. job
selection) by the control with digital signals (e.g. out of a SPS) and can be therefore
also controlled locally.
In the following the operation and programming with the TFT-Touch display are
described.
Release R1.03e LEIBINGER JET3