Leibinger JET3 User Manual page 50

Group 6
Device status (traffic light) (9): The status traffic light visualizes the current
condition of the JET3.
Figure 15
Display Device status
all LEDs off No
pending, but the LJ3 is not
ready to change to the print
mode.
red LED on An error is pending which
requires
intervention of the operator to
get the print readiness or to
continue
process.
yellow LED An intervention of the operator
on is required in the foreseeable
future because an warning is
pending.
If the JET3 is in the print
mode, the print process will be
continued.
green LED on The
readiness to print or that it can
be switched to the active print
mode.
Button <Off> (10): With this button you can switch off the device.
You will find further information also in the
device!
Release R1.03e
Operation – Elements and procedures
1
2
3
errors or warnings
an immediate
an active
printer signalizes
Causation/Comment
are e.g.: Nozzle is closed, head cover
is open, etc.
e.g.: Phasing error, PrintGo-error,
HV-error, etc.
print
z.B.: Refill, Leakage, etc.
If the message is acknowledged
without changing the condition
(e.g. no refill has been carried out)
the message will appear again
after one minute.
the The button
illuminated.
Page 50
1 – red LED
2 –yellow LED
3 – green LED
Status traffic light
<Print stop> is
Chapter Switch off
LEIBINGER JET3