Leibinger JET3 User Manual page 156

Group 8
Call up menu and carry out settings
(Example.: The menu „Printing Parameter" should be called)
Proceeding:
Press the button <Settings> (1) and the option <Print Parameter> (2).
The submenu <Job Settings (Print Parameter)> is faded in.
With the register cards (3) you can change between the several parameters
(functional areas).
Several functions can be activated or deactivated by clicking on the accordant
control box or on the designation.
With the arrow buttons (6) you can increase or reduce the values of the several
parameter settings by one step.
alternatively
By clicking in the accordant display field (4) of the value which should be
changed. A number block (5) opens for input in which you can enter the
requested value.
The button <OK> (8) closes the menu and the carried out settings will be taken
over.
The button <Cancel> (9) closes the menu without taking over the changes.
Release R1.03e
You will find further information regarding the working with
number blocks in the chapter Number block!
You will find further information regarding the several parameter
settings and its effects in the chapter Parameter settings!
Job editor Page 156
LEIBINGER JET3