2.2 Operating staff
Only trained personnel must operate the device. The personnel must have the
corresponding mechanical and electrical training to operate the inkjet printer
professionally. The operator is responsible for third parties in the working area of the
inkjet printer.
The owner-operator must make this operating manual accessible to the printer operator
and has to ensure that the operator has read and understood it.
Personnel in training can work on or with the inkjet printer only when supervised by an
experienced operator.
2.3 Dangers due to electrical energy
The electrical and electronic components of the high performance printer
are under voltage. The device must only be opened by trained personnel
or by Leibinger service technicians.
Prior to the opening of the device, the device must be switched off and the
mains plug removed.
Release R.1.02
ELECTRICAL WORK
Page 9
High Speed Line