Switching On With Password Protetction - Leibinger JET3 User Manual

Group 6

6.4.3.2 Switching on with password protetction

Proceeding:
Touch the dark Touch-Display (1) at any point. Period of touching approx. 2
sec..
The device turns on and the main menu
<Initialization> (3).
After the initialization the device starts with the bleeding of the system
automatically.
During the process the message <Bleeding> (4) is displayed. The bleeding
takes between 1 – 5 min. The process can be canceled by pressing the button
<Cancel> (5).
Note: For starting the device the job which has been used at last will be loaded
automatically.
The dialog field <Current login> (6) and a keyboard field (8) is faded in.
Enter your password with the keyboard field.
Press the button <Enter> (9) of the keyboard field to finish the input.
Now press the button <Login> (10) to finish the login.
Release R1.03e
Operation – Elements and procedures
You will find further information regarding the operation with
keyboard fields in the Chapter Keyboard fields!
Attention! The login can be also carried out without a password.
In this case only several basic functions of the device are
available for the user.
You will find further information in the Chapter Password
protection!
(2) is displayed with the message
Page 57
LEIBINGER JET3