Group 7
7.5.3 Product counter
In the production counter menu you can carry out settings of the production counter
and you can set-up a pre-defined print stop. Further more all existing job counters in
the current loaded job can be reset.
The production counter menu opens with the button <Extra> (2) and afterwards
selection of the menu <Product Counter> (3) in the faded-in submenu.
In the menu <Product Counter> the following options are available:
Product Counter Settings
Figure 60
4
3
1 – Button <Extra>
2 – Menu <Product Counter>
3 – Option <Product Counter Settings>
Release R1.03e
Data/Programming
Stop after x Products
1
5
4 – Option <Stop after x Products>
5 – Option <Reset all Job counters>
Reset all Job counters
2
Call up product counter menu
LEIBINGER JET3
Page 113