Interfaces; Ethernet-Connection - Leibinger JET3 User Manual

Group 5

5.4 Interfaces

The following interfaces are available on the rear side of the electronics cabinet.
Figure 8
1
1 – Electronic cabinet
2 – Interface X5 – PrintGo
3 – Interface X1 – Encoder
4 – Interface X4 – digital inputs

5.4.1 Ethernet-connection

The Ethernet-connection is implemented with a sturdy M12D coded socket and is
designed for high transfer rates and long cable lengths. It provides the networking
of several devices in multi-head applications. The data exchange happens via the
„LEIBINGER JET3-interface protocol".
Plug assignment:
Release R1.03e
Transport/Start up
5 – Interface X3 – digital outputs
6 – Interface X2 – Serial Interface
7 – Ethernet-connection
8 – USB connection
Pin connection:
Pin No Designation
1 Tx +
2 Rx +
8
7
6
5
4
3
2
Pin No. Designation
3 Tx -
4 Rx -
LEIBINGER JET3
Page 34
Interfaces