Font Selection - Leibinger JET3 User Manual

Group 8
The following settings can be carried out:
Pos. Object settings
1.

Font selection

2. Contrast value
3. Position X/Y
4. Orientation
5.1 Display mirrored
5.2 Display inverted
5.3 Display alternating
5.4 Display proportional
6. ICG-value
7. Bold level
8.4.1 Font selection
With the Pop-up window <Font> you can assign the requested font to the printing
element.
Figure 96
Release R1.03e
Job editor
Note
Not available for barcodes and graphics
Not available for barcodes and graphics
Not available for barcodes and graphics
Not available for barcodes and graphics
Font selection
Page 164
LEIBINGER JET3