Leibinger JET3 User Manual page 134

Group 7
Click in the grid of the input field on the requested start point (3).
The requested start point is placed and is marked red. At the same time on
the display <Coordinates> (4) the coordinates of the start points are shown
and on the display <Activities to carry out> (5) you can see the next
required or possible activity.
Now click in the grid on the requested position of the end point (6). The
rectangle is now created.
Figure 75
1
1 – Button <Function>
2 – Drawing tool <Rectangle>
3 – Start point
2. Deletion of a graphic element or graphic segment:
(Example: A rectangle should be interrupted and a line should be deleted)
Proceeding:
Press the button <Function> (1) and afterwards on the drawing tool
<Selection> (2).
Release R1.03e
Data/Programming
3
2
5
6
4 – Display <Coordinates>
5 – Display <Activities to carry out>
6 – End point (Rectangle)
4
Graphic editor (Create graphic)
LEIBINGER JET3
Page 134