Password Settings And User Authorizations; Menu Password Settings - Leibinger JET3 User Manual

Group 7

7.3.2 Password settings and user authorizations

The LEIBINGER JET3 offers different access levels which are protected by
passwords from faulty operation or non-authorized access. Five levels of access
authorization are available. For each level any functions can be enabled or blocked
to apply access rights for e.g. operator or supervisor (free definable).

7.3.2.1 Menu password settings

With the option <Password Settings> (2) the menu „Password settings" (3) opens.
This menu provides
Selection of user levels (Level of access right)
Definition of access rights.
Definition of passwords
In the several functional areas you can enable or lock the functions in the current
access levels. An enabled function is displayed by a √ in the accordant control box.
The selection of a functional area happens by clicking on the accordant register card
(4).
Note: The proceeding corresponds to the Windows™-standard procedure.
With the pop-up window <Level> (5) you can select the user levels for which you
would like to carry out the settings.
In the input field <Password> (6) you can enter the password for the current user
level or you can display an already defined password.
With the button <set...> (7) the password which has been entered for the current
access level will be taken over.
With the button <OK> (8) the menu closes and the settings will be saved.
The button <Cancel> (9) closes the menu without taking over the carried out
changes.
Release R1.03e
Data/Programming Page 84
LEIBINGER JET3