Leibinger JET3 User Manual page 112

Group 7
Attention! If the test print is activated when a print start release did
already happen for the previous loaded job, the JET3 starts
immediately with the print process because all signals are generated
internally and no sensor or encoder are required.
Attention! Ink escapes immediately from the print head!
Press the button <Extra> (1) and the option <Test Print> (2) or the accordant
direct buttons (Icon) (3).
A safety query (4), if the test print should be really started is faded in.
Confirm the loading of the job by pressing the button <OK> (5) or cancel the
process with the button <Cancel> (6).
A message (7), that the test print-job is loaded is faded in.
Confirm the message with the button <OK> (8). The job is now loaded and can
be started for printing.
Release R1.03e
Data/Programming Page 112
LEIBINGER JET3