Encoder Interface - Leibinger JET3 User Manual

Group 7

7.3.1.4 Encoder interface

Under the register card <Encoder Interface> you can define the incremental
encoder.
Proceeding:
Press on the register card<Encoder Interface> (2) to select the functional area.
Press on the arrow button of the pop-up window <Encoder settings> (3). The
pop-up window opens for selection.
Now select the required interface.
Figure 39
2
1 –Menu <Basic Settings>
2 –Register card <Encoder Interface>
Pos. Interface
1. RS422
2. TTL
3. HTL
Release R1.03e
Data/Programming
3 – Pop-up window <Encoder settings>
Describtion
5V / 4 Signals (A, Ā, B, B)
5V TTL / 2 Signals (A, B)
24V / 2 Signals (A, B)
Page 81
1
3
Select encoder interface
LEIBINGER JET3