Barcode - Leibinger JET3 User Manual

Group 8
8.7 Printing elements

8.7.1 Barcode

Provides the implementation of barcodes and definition of the required barcode
parameters.
8.7.1.1 Barcode informations
Code 128c:
is essentially shorter than code 128b
only numeric characters are valid (no punctuation symbols, letters or
spaces are valid (only numbers from 0-9 can be displayed)
only an even amount of digits is valid
Code 128b:
is longer than the C-variante
can display complete ASCII-sentences
can also display an odd amount of digits
2 of 5 interleaved (Code 25):
only numerical code (only numbers from 0-9 can be displayed)
only an even amount of digits is valid
Code 39:
alphanumerical code
(is available with or without Gothic character (clear figure) for the
LEIBINGER JET3.)
EAN 8:
(only numbers from 0-9 can be displayed)
has to be always 8-digits (7 performance characters and 1 check digit)
(is available with or without clear figure for the LEIBINGER JET3)
Release R1.03e
(The small barcode 1x1)
Note! The LEIBINGER JET3 does not carry out any check digit
calculations generally.
This has to be carried out external in advance!
Job editor Page 188
LEIBINGER JET3