Leibinger JET3 User Manual page 80

Group 7
Proceeding:
Press on the register card <Interval> (2) to select the functional area.
Now mark in the setting field <Interval On> (3) the hour- or minute block to
change the values.
With the the two <Arrow buttons> (6) you can increase or reduce the blocks
wich are each marked.
Now carry out the settings in the field <Interval (Off> (4) accordingly.
Now activate if necessary the viscosity control by clicking on the control box
(7). An activated control is displayed by a √ in the control box.
Release R1.03e
Data/Programming Page 80
LEIBINGER JET3