Table of Contents
Advertisement
QueueId
Explicit/Default
CIR
CIR Adpt Rule
PIR
PIR Adpt Rule
QueueId
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Label
Displays the Queue identifier associated with the sap-egress
QoS policy.
Explicit — Specifies the egress IEEE 802.1P (dot1p) bits mark-
ing for fc-name if explicitly configured.
Default —Specifies the default dot1p value according to FC-Dot1p
marking map as defined in
Definition, on page 53
Specifies the administrative Committed Information Rate (CIR)
parameters for the queue. The CIR defines the rate at which the
system prioritizes the queue over other queues competing for the
same bandwidth.
min — The operational CIR for the queue will be equal to or
greater than the administrative rate specified using the rate com-
mand.
max — The operational CIR for the queue will be equal to or
less than the administrative rate specified using the rate com-
mand.
closest — The operational CIR for the queue will be the rate
closest to the rate specified using the rate command without
exceeding the operational PIR.
Specifies the administrative Peak Information Rate (PIR)
parameters for the queue. The PIR defines the maximum rate
that the queue can transmit packets through the access port.
min — The operational PIR for the queue will be equal to or
greater than the administrative rate specified using the rate com-
mand.
max — The operational PIR for the queue will be equal to or
less than the administrative rate specified using the rate com-
mand.
closest — The operational PIR for the queue will be the rate
closest to the rate specified using the rate command.
Displays the Queue identifier associated with the sap-egress
QoS policy
Description (Continued)
Table 22, Default SAP Egress Policy ID 1
if explicit values are not configured..
Parent Details
Page 347
Advertisement
Table of Contents
