Table of Contents
Advertisement
When 'no ldp-use-local-fc-enable' is set, system sets it to the default value. User cannot modify it.
When ldp-use-local-fc-enable is set, on system boot-up sets it to the default value. User can
modify it to use the policy of their choice.
For LDP LSP traffic, the system always uses the global mpls-lsp-exp-profile-map policy. For
RSVP LSP traffic, system uses the mpls-lsp-exp-profile-map policy associated with the network
policy. It is highly recommended to use a single mpls-lsp-exp-profile-map policy for all the
network policies when FRR facility is in use for consistent QoS treatment.
The no form of the command sets the policy to default policy.
Default
Default mpls-lsp-exp-profile-map policy "1" is used.
Parameters
policy-id — The policy-id uniquely identifies the mpls-lsp-exp-profile-map policy to use.
Values
mpls-lsp-exp-profile
Syntax
mpls-lsp-exp-profile policy-id [create ]
no mpls-lsp-exp-profile
Context
config>qos>network>ingress
Description
Specify the mpls-lsp-exp-profile-map policy to use for assigning profile values for packets
received on this IP interface.
When 'no ldp-use-local-fc-enable' is set, this policy is managed by the system. User is not allowed
to modify it. The system assigns the same policy ID as the network policy ID. It is cannot be
modified by the user.
When 'ldp-use-local-fc-enable' is set, by default the system assigns the default policy ID "1". User
can create new policies and specify the new policy instead of the default policy.
Note: For LDP LSP traffic, the system always uses the global mpls-lsp-exp-profile-map policy.
For RSVP LSP traffic, system uses the mpls-lsp-exp-profile-map policy associated with the
network policy. It is highly recommended to use a single mpls-lsp-exp-profile-map policy for all
the network policies when FRR facility is in use for consistent QoS treatment.
The no form of the command assigns the default policy.
Parameters
policy-id — The policy-id uniquely identifies the policy on the 7210 SAS.
Values
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
1 — 65535
1 — 65535
Operational Commands
Page 137
Advertisement
Table of Contents
