Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual page 193

Burst Sizes (CBS/
MBS)
Time Avg Factor
FC and UcastQ
*A:SAS-X>config>qos>network-queue#
===============================================================================
QoS Network Queue Policy
===============================================================================
-------------------------------------------------------------------------------
Network Queue Policy (default)
-------------------------------------------------------------------------------
Policy
Accounting
Description
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Port-id : 1/1/10
Port-id : 1/1/19
Port-id : 1/1/20
Port-id : 1/1/24
===============================================================================
*A:SAS-X>config>qos>network-queue#
===============================================================================
QoS Network Queue Policy
===============================================================================
-------------------------------------------------------------------------------
Network Queue Policy (default)
-------------------------------------------------------------------------------
Policy
Accounting
Description
-------------------------------------------------------------------------------
Queue Rates and Rules
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId
-------------------------------------------------------------------------------
Queue1
Queue2
Queue3
Queue4
Queue5
Queue6
Queue7
Queue8
-------------------------------------------------------------------------------
Parent Details
-------------------------------------------------------------------------------
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Table 36: Network Queue Labels and Descriptions
Label
Displays the configured CBS and MBS value
Displays the WRED Time Average Factor value in use
Displays the forwarding class (FC) to Queue association
: default
: packet-based
: Default network queue QoS policy.
: default
: packet-based
: Default network queue QoS policy.
CIR(%) CIR Adpt Rule
0
25
25
25
100
100
10
10
Description
show qos network-queue default
show qos network-queue default detail
PIR(%)
closest 100
closest 100
closest 100
closest 100
closest 100
closest 100
closest 100
closest 10
Show Commands
PIR Adpt Rule
closest
closest
closest
closest
closest
closest
closest
closest
Page 193