Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual page 220

Basic Configurations
Service Ingress IP Match Criteria
When specifying SAP ingress match criteria, only one match criteria type can be configured in the
SAP ingress QoS policy.
The following displays an ingress IP criteria configuration:
7210-SAS>config>qos>sap-ingress# info
----------------------------------------------
----------------------------------------------
7210-SAS>config>qos>sap-ingress#
7210-SAS>config>qos>sap-ingress# info
----------------------------------------------
----------------------------------------------
7210-SAS>config>qos>sap-ingress#
Service Ingress MAC Match Criteria
To configure service ingress policy MAC criteria, define the following:
•
•
Page 220 7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
num-qos-classifiers 32
meter 1 create
exit
meter 11 multipoint create
exit
fc "h2" create
exit
ip-criteria any
entry 16 create
description "test"
match
exit
action fc "be"
exit
exit
num-qos-classifiers 4
meter 1 create
exit
meter 11 multipoint create
exit
ip-criteria dscp-only
entry 30 create
match
exit
action fc "l2"
exit
exit
A new entry ID value. Entries must be explicitly created. The system will not dynamically
assign entries or a value.
The action to associate the forwarding class with a specific MAC criteria entry ID.