Table of Contents
Advertisement
WRED Slope Commands
max-avg
Syntax
max-avg percent
no max-avg
Context
config>qos>queue-mgmt>high-slope
config>qos>queue-mgmt>low-slope
Description
This command is used to configure the maximum average value.
Default
max-avg 90 — High slope default is 90% buffer utilization.
max-avg 75 — Low slope default is 75% buffer utilization.
Parameters
percent — Specifies the maximum average for the high or low slopes.
Values
max-prob
Syntax
max-prob percent
no max-prob
Context
config>qos>queue-mgmt>high-slope
config>qos>queue-mgmt>low-slope
Description
This command is used to configure the maximum probability value.
Default
max-avg 75 — High slope default is 75% maxium drop probability.
max-avg 75 — Low slope default is 75% maxium drop probability.
Parameters
percent — Specifies the maximum probability for the high or low slopes.
Values
shutdown
Syntax
[no] shutdown
Context
config>qos>queue-mgmt>high-slope
config>qos>queue-mgmt>low-slope
Description
This command enables or disables the administrative status of the WRED slope.
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
0 — 100
1 — 99
Page 377
Advertisement
Table of Contents
